智步 · 选型沟通清单 / Product planning checklist
版本 / Version: 2026-10-22
用途：整理咨询信息。此文件不是产品说明书，草拟规格不可用于采购或接线。
Purpose: prepare an enquiry. This is not a product manual; draft specifications must not be used for ordering or wiring.

智能控制器 / Lighting controller

项目 / Project: ____________________
现场尺寸 / Site dimensions: ____________________
装修阶段 / Installation stage: ____________________
期望效果 / Desired effect: ____________________
现有供电及设备 / Existing power and equipment: ____________________

所选型号／全亮或逐级／平台：____________________
Model / all-on or sequential / platform: ____________________
灯条／驱动／感应器／总负载：____________________
Strip / driver / sensor / total load: ____________________

核对事项 / Discussion points:
[ ] 先确定全亮、逐级或彩色型号，整理灯条、驱动、感应器及期望效果；不同型号不共用接线图。
    Choose an all-on, sequential or color model and list the strips, drivers, sensors and desired effects. Wiring diagrams are model-specific.
[ ] 预留通风、干燥且可检修的位置，并做好每段线路的标识。
    Reserve a dry, ventilated and accessible location and label the cable runs.
[ ] 由安装人员按对应型号的正式接线图核对电源、输出与感应接口；米家远程及联动另确认网关。
    Have the installer check power, outputs and sensors against the exact model wiring diagram. Confirm the gateway separately for Mi Home remote control and routines.
[ ] 分段检查灯光与触发，再按实际使用习惯调整效果。
    Check lighting and triggers section by section, then adjust the behavior to suit use.

请准备现场照片、尺寸草图与已有产品型号，通过网站在线咨询或品牌企业微信沟通。
Prepare photos, a dimension sketch and existing product model numbers; contact us through the website enquiry form or brand WeCom.
正式型号、参数、价格、交期及服务条件以双方确认资料为准。
Confirm the actual model, ratings, price, lead time and service terms before ordering.