智步 · 选型沟通清单 / Product planning checklist
版本 / Version: 2026-10-22
用途：整理咨询信息。此文件不是产品说明书，草拟规格不可用于采购或接线。
Purpose: prepare an enquiry. This is not a product manual; draft specifications must not be used for ordering or wiring.

楼梯灯带 / Step lighting

项目 / Project: ____________________
现场尺寸 / Site dimensions: ____________________
装修阶段 / Installation stage: ____________________
期望效果 / Desired effect: ____________________
现有供电及设备 / Existing power and equipment: ____________________

灯条结构／色温／线制：____________________
Strip construction / CCT / wiring: ____________________
每级长度／模组／配套控制器：____________________
Per-tread length / module / matching controller: ____________________

核对事项 / Discussion points:
[ ] 测量每级踏步长度、数量和结构，先确定 10 × 10 mm 铝型材或 12 × 12 mm 硅胶灯条。
    Measure each tread and count the steps before choosing a 10 × 10 mm aluminium profile or 12 × 12 mm silicone strip.
[ ] 按选定结构复核槽位与固定方式；资料给出的开槽参考为 15 × 15 mm，卡扣长度为 12 cm。
    Check recesses and fixings for the selected construction. The source gives a 15 × 15 mm reference recess and a 12 cm clip.
[ ] 断电后按对应说明操作：铝型材需先分离灯罩并移开灯带，再裁型材；灯带仅在已确认剪切点裁切，不连同内部灯带直接锯切。
    Disconnect power and follow the matching instructions. Separate the diffuser and move the strip clear before cutting the aluminium. Cut the strip only at confirmed marks; never saw through the assembled strip.
[ ] 核对模组、线制、端子、控制器与电源负载，正式固定前逐段试装并检查上下楼感应。
    Match modules, wiring, terminals, controller and supply capacity; trial-fit each section and test sensing in both directions before fixing.

请准备现场照片、尺寸草图与已有产品型号，通过网站在线咨询或品牌企业微信沟通。
Prepare photos, a dimension sketch and existing product model numbers; contact us through the website enquiry form or brand WeCom.
正式型号、参数、价格、交期及服务条件以双方确认资料为准。
Confirm the actual model, ratings, price, lead time and service terms before ordering.