智步 · 选型沟通清单 / Product planning checklist
版本 / Version: 2026-10-22
用途：整理咨询信息。此文件不是产品说明书，草拟规格不可用于采购或接线。
Purpose: prepare an enquiry. This is not a product manual; draft specifications must not be used for ordering or wiring.

感应器 / Motion sensor

项目 / Project: ____________________
现场尺寸 / Site dimensions: ____________________
装修阶段 / Installation stage: ____________________
期望效果 / Desired effect: ____________________
现有供电及设备 / Existing power and equipment: ____________________

型号／安装角度与距离：____________________
Model / mounting angle and range: ____________________
上楼／下楼接头定义（先确认）：____________________
Top / bottom connector mapping (confirm first): ____________________

核对事项 / Discussion points:
[ ] 标出正常经过的位置与方向，记录附近可能影响感应的物体。
    Mark normal approach positions and directions and nearby objects that may affect sensing.
[ ] 按选定型号核对安装结构；30°／90° 嵌入式红外资料列 20 mm 开孔，正式开孔前核对实物；上下楼端子先确认再连接。
    Check mounting requirements for the model. The 30°/90° recessed infrared sources list a 20 mm cutout; verify the actual unit before drilling and confirm direction connectors before wiring.
[ ] 分别测试上下楼、停留和旁侧经过的响应。
    Test upward and downward travel, pauses and nearby passing traffic.
[ ] 确认效果后固定，保留调整方向及检修的空间。
    Fix in place after testing, leaving access for orientation changes and servicing.

请准备现场照片、尺寸草图与已有产品型号，通过网站在线咨询或品牌企业微信沟通。
Prepare photos, a dimension sketch and existing product model numbers; contact us through the website enquiry form or brand WeCom.
正式型号、参数、价格、交期及服务条件以双方确认资料为准。
Confirm the actual model, ratings, price, lead time and service terms before ordering.